700E V2 Features:
Re-designed all metal main blade control system, with detachable main rotor grips, to provide incredible rigidity and precision.
Wide +/- 15 degree pitch range for superior 3D performance and explosive power.
Innovative sliding battery tray rails are embedded into the 3K side frames and a patented spring loaded latching mechanism provides quick battery access and battery protection.
Laterally adjustable metal left/right control bellcrank arms and elevator control arms enable the most ideal endpoint travel adjustment for the 3GX flybarless and standard flybar systems, while increasing servo resolution for improved control precision.
Includes CNC mod-1 helical main gear for the highest load tolerance, lowest noise and improved durability.
Top mounted motor base brings the motor's center of gravity closer to the rotating disc, improving 3D agility and allowing blade drafts to cool the motor effectively.
A third motor bearing block has been added to the side frame to ensure trueness of the motor shaft under extreme radial force. This improves the motor efficiency and lifespan.
Top mounted ESC platform to take advantage of main blades airflow for effective cooling.
New lightweight H-shaped electric device retention system for protection, as well as ergonomically correct design to simplify operation.
Efficient shaft drive tail system.
3GX Features:
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Built in governor function
Compatible with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without the use of a PC
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognition
700E V2 Specifications:
Length: 1328mm
Height: 408mm
Main Blade Length: 690mm
Main Rotor Diameter: 1562mm
Tail Rotor Diameter: 281mm
Motor Drive Gear: 12T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 24T
Drive Gear Ratio: 1:9.33:4.33
Weight (w/Motor): 2830g
Flying Weight: Approx. 4700g
3GX Specifications:
Operating Temperature: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6mm Size
Weight: 11g
Maximum working voltage: 8.5V
Includes:
(1) T-REX 700E V2 3GX Kit
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690mm 3G Carbon Fiber Blades
(3) Align DS610 Digital Servo Set
(1) Align DS650 Digital servo
(1) Align 3GX flybarless system
(1) Align 700MX 510kV motor
(1) Castle ICE HV 120 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set
6 Cell Li-Po
Specs:
Voltage: 22.2volts
Capacity: 5000 mAh
Discharge rating: 45C
Size: (L) 6.46" (W) 1.86" (H) 2.232"
Weight: 26.88 ounces
Max continuous discharge: 45C(225.0A)
Max Burst discharge: 90C(450.0A)
Balance Plug type: Align
HYPERION Charger Specifications:
• 1~14 cells Li-Poly, Li-Ion or A123 charger / balancers
• 1~16 cells NiCad / NiMH
• 1~12 cells Sealed Lead Acid
• DC Output: 20.0A, 500W max per port
• DC Input: 10.5~28V
• Discharge Limits: 5.0A, 40W max (per port)
• Store Mode
• Dual Integrated balancers
• Temperature Sensor Port
• Firmware Upgradeable
• TCS System
• Sync mode for Li-Poly & LiFe
• Includes two PQ/HP and two JST XH adapter boards
NOTE: A 24V, 1300W power source is required to supply 1000 Watt output.
2 cell Li-Po Battery Specs:
Voltage: 7.4 volts
Capacity: 2500 mAh
Discharge rating: 10C
Size: (L) 3.8" (W) 1.3" (H) 1.4"
Weight: 3.75 ounces
Balance Plug type: THP
11 Channel Radio Specs:
- # of Channels: 11
- Modulation: DSMX
- Band: 2.400 to 2.483GHz
- Servos: No servos included
- Receiver: R921
- Model Memory: 30, expandable with SD card slot
- Modes: Mode 2
- Transmitter (Tx) Battery Type: 1500mAh 9.6V Ni-MH
- Charger: JR AD35M05; Input - 120V AC 60Hz, Output - Tx DC11.6V - 110mA. Rx DC5.8V 110mA
- Switch: Deluxe Switch Harness
