Product introduction:
Control cable of plastic insulated and braided shield by copper wire
A. This product is suitable for the control monitoring circuit of AC rated voltage U0/U of 450/750V and below and the connecting line of electrical instrument in protection circuit and power distribution device. It has good shielding effect and anti-interference effect.
B. Product standard:GB/T 9330-2008.
C. The type and specifications of cable are shown in the table below.
| Insulation type | Type | Name | Core numbers | Nominal cross sectional area(mm2) |
| PVC | KVVP | Control cable of copper conductor, PVC insulated, PVC sheathed, and braided shield by copper wire | 2-61 | 0.5-10 |
| KVVRP | The control flexible cable of Copper conductor, PVC insulated, PVC sheathed, and braided shield by copper wire |
| XLPE | KYJVP | Control cable of copper conductor, XLPE insulated, PVC sheathed, and braided shield by copper wire |
| KYJVRP | The control flexible cable of Copper conductor, XLPE insulated, PVC sheathed, and braided shield by copper wire |
Using Features:
1. The power frequency rated voltage Uo / U is 450 / 750V.
2. When the cable is laid, the ambient temperature should not be lower than 0 °C. If the ambient temperature is lower than 0 °C, the cable should be preheated.
3. The recommended bending diameter of the cable is as follows:
Cables without armor shall not be less than 6 times the outer diameter of the cable;
Armored or copper tape shielded cable shall not be less than 12 times the outer diameter of the cable;
The shielded flexible cable should be no less than 6 times the outer diameter of the cable.
