12V Mini Brushless DC submersible pump quiet absolute safety
Power saving Max head 3m For table fountain music fountain
Fit for table fountain, music fountain, PC/ computer cooling, circulation, aquarium pumping, water-cooling mattress, and water bed application.
Features:
Super long working life(more than 30000 hours)
Adopt high performance ceramic shaft
The axis is enclosed with static sealing, not dynamic, which can avoid leaking problems
Amphibious design
Submersible installation and entirely waterproof
Low consumption
Low noise(less than35dB)
Can be used in many fields, such as computer cooling system, Garden fountain, Aquarium, car cooling system, humidifier, air conditioner, and many other cooling and circulation systems.
Specifications:
Sizes and weight: 51X34X43; 60g
Driving method: Brushless Design, Permanent Magnetic, 2 phase
Pump material: ABS
Condition of use: Continuously
Fluids: Water, oil, gasoline, acid and alkali solution
Max working temp: 60 Celsius Degree
Power consumption: 4W
Rated voltage: 12V DC
Voltage used: 5VDC-12VDC
Max rated current: 350mA
Max flow rate: 4L/MIN(1.06G/MIN)
Max Static Head: 3m(9.7ft)
Noise: < 40dB(most 35dB)
Water proof class: IP68(can be submersible installed)
Life span: More than 30000hrs
Power supply: Solar panel; DC electric source; Battery
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max heightwhen there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump(refer to the above Head-Flow Curve graph).
2. Make sure the dimension(threaded interface or not, the direction and diameter of outlet and inlet).
3. Working environment(temperature and medium).
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
Note:
1. Working at rated voltage. The positive pole isred wire, the negative pole is black wire.
2. This pump is centrifugal pump, it can't vent the air automatically, so it must be operated by submersible installation. (if outside water installation, you should make sure it is installed blow the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.